Access Controller
 |
EL5030 | ||
| Hybrid based Networked Access System | |||
| EL5030 is an all new powerful hybrid based networked access controller designed to give the user the most flexible and cost effective access control design to meet any building requirement. It can operate in a fully centralized topology, field design topology or hybrid type topology making it the most desirable controller to use and specify. It is developed using the same engine as its highly successful predecessor EL5000 for greater performance and reliability assurance. | |||
 |
Configurable to work on 3 or 5 or 8 access portals | ||
|
Large database of 15,000 card users and 25,000 offline transactions | ||
|
Card database upgradable to an astonishing 300,000 card users | ||
|
Reader support: Magnetic, Bar Code, EM/HID Proximity, Mifare, Biometric Devices | ||
|
32-bit-low-power and high performance microprocessor | ||
|
Peer-to-peer communication with other EL 5000 series controller for data sharing intelligence | ||
|
Multi-function; Standard Access Mode/Car-Park control/Time clocking –Late reasoning mode | ||
|
Enhanced Anti-passback capabilities ( Hard/Soft/Alarm) | ||
|
Support an expansion slot for future-proof requirements | ||
|
40 holidays set; 99 timezones with 99 timers with 4 time intervals | ||
|
Built in tamper alarm, battery low, AC fail | ||
Specification
| Model | EL5030 |
| Manufacturer | ELID Sdn Bhd |
| Country of Origin | Malaysia |
| Microprocessor | 32-bit 386EX running at 25 MHz |
| Card Users | 12000 |
| Transactions | 25000 |
| Memory | 2MB RAM |
| Access Modes | Card, PIN & Card + PIN |
| Standalone Operation | YES |
| Real-Time Scanning | YES |
| Tamper Detection | YES |
| Display | 2x16 Character |
| Connectivity | TCP / IP, RS485 |
| No of RS485 BUS | 1 (2 with EB2) |
| Access Applications | Door, Car Park Access, Time Clocking |
| Max. Doors Supported | 5 in Centralized, 8 in Field Deployment |
| Type of Readers Supported | Barcode, Magnetic, Proximity, Smart Cards, Biometrics, Touch Memory |
| Max. Reader Supported |
A.Without EA202: 3 IN Readers and 3 Exit Push Button (3 OUT with EA46 Converter) B. With EA202: 5 IN Readers and 5 Exit Push Button (5 OUT with EA46 Converter), No additional RIUs are permitted |
| Max. RIU Supported | 8 units of ER502 or EK9i or 4 units of ER505 |
| Max. EFD Supported | 8 units of EFD32 or EFD80 (with EB2) |
| Operating Temperature | 0oC to 60oC |
| Humidity | 10% to 90% non-condensing |
| Power Requirements | 12VDC with 1.5 Amp Charger |
| Access Applications | Door, Car Park Access, Time Clocking |
| Casing Dimensions | 410 (H) x 400 (L) x 120 (W) mm |
| Approximate Weight | 5kg with Casing and Power Supply |
| Approximate Weight | 600gm without Casing and Power Supply |
